Having concerts or shows at night means that you have to pay close attention to the lighting in the venue. As much as possible, you should provide for the proper lighting of the stage, one that is appropriate for the shows that you are hosting. For example, you should consider using the RGB laser show system when it is applicable.
This should be the kind of equipment that you will have to get when you want to take advantage of lasers to light up the stage and hype up the excitement that the audience feels. If you think that this is one of the lighting you should have, then know what you should consider when picking this. Here are some of those factors to know of.
Beam direction. Since you are utilizing the lasers, you will be using beams to create graphics and the likes. You have to properly aim to the beams to its proper course so that it can create the graphics you desire. Moreover, it should be positioned over the audiences' heads. Thus, you have to ensure that there is proper beam directions.
Graphic screens. It is also a must that you consider about the graphic screens. You have to make the right pick. In the event you are hosting, a rear-projection is generally preferable compared to front-projection. You can hide the beams creating your graphics when you use the rear-projection instead of the other alternatives.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
You better take note of control positioning as well the setup time for the said equipment. You must always take note of the time when the lasers and beams should be used. If you can control them as meticulously as you can, then you should be able to put a good show with just the use of the beams and lasers.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Know what the ceiling heights that must be taken into account should be. There are requirements that the state has given regarding the height and even the lateral space that should be taken when you are using this equipment. It is your job to follow through with the requirements the state has set.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
This should be the kind of equipment that you will have to get when you want to take advantage of lasers to light up the stage and hype up the excitement that the audience feels. If you think that this is one of the lighting you should have, then know what you should consider when picking this. Here are some of those factors to know of.
Beam direction. Since you are utilizing the lasers, you will be using beams to create graphics and the likes. You have to properly aim to the beams to its proper course so that it can create the graphics you desire. Moreover, it should be positioned over the audiences' heads. Thus, you have to ensure that there is proper beam directions.
Graphic screens. It is also a must that you consider about the graphic screens. You have to make the right pick. In the event you are hosting, a rear-projection is generally preferable compared to front-projection. You can hide the beams creating your graphics when you use the rear-projection instead of the other alternatives.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
You better take note of control positioning as well the setup time for the said equipment. You must always take note of the time when the lasers and beams should be used. If you can control them as meticulously as you can, then you should be able to put a good show with just the use of the beams and lasers.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Know what the ceiling heights that must be taken into account should be. There are requirements that the state has given regarding the height and even the lateral space that should be taken when you are using this equipment. It is your job to follow through with the requirements the state has set.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
About the Author:
You can visit www.stagelasers.com for more helpful information about Factors To Remember When Installing RGB Laser Show System.
No comments:
Post a Comment